HTS Code Lookup

68.05

Natural or artificial abrasive powder or grain, on a base of textile material, of paper, of paperboard or of other materials, whether or not cut to shape or sewn or otherwise made up

HTS Heading

68.05

Chapter

Chapter 68

Schedule

HTSUS

Duty rates and tariff status vary by subheading (6–10 digit code). Run a full classification below to get the exact rate for your product.

About HTS Heading 68.05

HTS heading 68.05 of the United States Harmonized Tariff Schedule covers natural or artificial abrasive powder or grain, on a base of textile material, of paper, of paperboard or of other materials, whether or not cut to shape or sewn or otherwise made up. It is a four-digit heading within Chapter 68, which sits in Section XIII of the tariff schedule — Articles of Stone, Plaster, Cement, Asbestos, Mica; Ceramic Products; Glass and Glassware. Importers use this heading as the starting point for classifying goods of this type before narrowing down to the exact 8- or 10-digit code that determines the duty rate.

Correct classification under 68.05 matters because it drives your base (MFN) duty rate and determines whether trade-remedy tariffs — Section 301, Section 232, IEEPA, or anti-dumping/countervailing duties — apply to your shipment. Misclassification is one of the most common and costly import errors.

This heading covers abrasive materials like sand, emery, or pumice that are bonded to textile fabrics, paper, or other backing materials, used for grinding and polishing surfaces. US importers include manufacturers of tools, automotive suppliers, woodworking companies, and metalworking facilities.

Common Products Classified Under 68.05

Examples of products US importers typically classify under heading 68.05 include:

Sandpaper sheets with grit bonded to paper backingEmery cloth rolls for metal polishing and finishingAbrasive sanding belts for power toolsWet/dry abrasive paper for automotive paint preparationFlocking abrasive strips mounted on fabric backingAluminum oxide abrasive cloth for woodworkingPumice stone sheets on textile or paper baseSilicon carbide abrasive paper for finishing applications

Product examples are illustrative; confirm the exact 10-digit classification for your specific item.

How to Read HTS Code 68.05

A full US HTS code is 10 digits, built up in stages. For heading 68.05:

  • 68 — the Chapter (the broad product category).
  • 68.05 — the 4-digit heading (this page): natural or artificial abrasive powder or grain, on a base of textile material, of paper, of paperboard or of other materials, whether or not cut to shape or sewn or otherwise made up.
  • 6 digits — the international subheading (matches HS codes worldwide).
  • 8–10 digits — the US-specific statistical suffix that sets your exact duty rate and Section 301 status.

Duty Rate & Section 301 Status for 68.05

There is no single duty rate for a 4-digit heading — the rate is set at the subheading level and depends on your product's exact code and its country of origin. To determine what you'll actually owe on goods under 68.05:

  • Find the exact 10-digit subheading for your specific product.
  • Read the general (MFN) duty rate from Column 1 of the HTS.
  • Add any trade-remedy tariffs that apply to your origin — Section 301 (China), Section 232 (steel/aluminum), IEEPA, or AD/CVD orders.

The classification tool below verifies the code against the USITC Harmonized Tariff Schedule and flags Section 301 exposure automatically.

Run full classification analysis

Enter your product description below to get the specific 10-digit HTS code, duty rate, and Section 301 tariff status.

Include country of origin for more accurate Section 301 analysis (e.g., "cotton t-shirts from Bangladesh")

Other Headings in Chapter 68

68.01Setts, curbstones and flagstones, of natural stone (except slate)68.02Worked monumental or building stone (except slate) and articles thereof, other than goods of heading 6801; mosaic cubes and the like, of natural stone (including slate), whether or not on a backing; artificially colored granules, chippings and powder, of natural stone (including slate)68.03Worked slate and articles of slate or of agglomerated slate68.04Millstones, grindstones, grinding wheels and the like, without frameworks, for grinding, sharpening, polishing, trueing or cutting, hand sharpening or polishing stones, and parts thereof, of natural stone, of agglomerated natural or artificial abrasives, or of ceramics68.06Slag wool, rock wool and similar mineral wools; exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials; mixtures and articles of heat-insulating, sound-insulating or sound-absorbing mineral materials68.07Articles of asphalt or of similar material (for example, petroleum bitumen or coal tar pitch)68.08Panels, boards, tiles, blocks and similar articles of vegetable fiber, of straw or of shavings, chips, particles, sawdust or other waste, of wood, agglomerated with cement, plaster or other mineral binders68.09Articles of plaster or of compositions based on plaster68.10Articles of cement, of concrete or of artificial stone, whether or not reinforced68.11Articles of asbestos-cement, of cellulose fiber-cement or the like68.12Fabricated asbestos fibers; mixtures with a basis of asbestos or with a basis of asbestos and magnesium carbonate; articles of such mixtures or of asbestos (for example, thread, woven fabric, clothing, headgear, footwear, gaskets), whether or not reinforced68.13Friction material and articles thereof (for example, sheets, rolls, strips, segments, discs, washers, pads), not mounted, for brakes, for clutches or the like, with a basis of asbestos, of other mineral substances or of cellulose68.14Worked mica and articles of mica, including agglomerated or reconstituted mica, whether or not on a support of paper, paperboard or other materials68.15Articles of stone or of other mineral substances (including carbon fibers, articles of carbon fibers and articles of peat), not elsewhere specified or included

Frequently Asked Questions

What is HTS code 68.05?

HTS heading 68.05 covers natural or artificial abrasive powder or grain, on a base of textile material, of paper, of paperboard or of other materials, whether or not cut to shape or sewn or otherwise made up. It is a 4-digit heading in Chapter 68, Section XIII (Articles of Stone, Plaster, Cement, Asbestos, Mica; Ceramic Products; Glass and Glassware). The full duty rate is set at the 8- to 10-digit subheading level.

What products are classified under HTS 68.05?

Products described as natural or artificial abrasive powder or grain, on a base of textile material, of paper, of paperboard or of other materials, whether or not cut to shape or sewn or otherwise made up are classified under heading 68.05. To find the exact 10-digit code for a specific product, run a classification against the USITC Harmonized Tariff Schedule.

How do I find the import duty rate for HTS 68.05?

The rate depends on the specific 10-digit subheading and country of origin. Determine the full HTS code, then check the general (MFN) rate plus any Section 301, Section 232, IEEPA, or anti-dumping/countervailing duties for your origin.

Is HTS 68.05 subject to Section 301 tariffs?

Section 301 tariffs apply to many products of Chinese origin, assigned at the 8-digit subheading level. Whether a product under 68.05 carries one depends on its exact subheading and origin — verify against the current USTR Section 301 lists.