HTS Code Lookup
Millstones, grindstones, grinding wheels and the like, without frameworks, for grinding, sharpening, polishing, trueing or cutting, hand sharpening or polishing stones, and parts thereof, of natural stone, of agglomerated natural or artificial abrasives, or of ceramics
Duty rates and tariff status vary by subheading (6–10 digit code). Run a full classification below to get the exact rate for your product.
HTS heading 68.04 of the United States Harmonized Tariff Schedule covers millstones, grindstones, grinding wheels and the like, without frameworks, for grinding, sharpening, polishing, trueing or cutting, hand sharpening or polishing stones, and parts thereof, of natural stone, of agglomerated natural or artificial abrasives, or of ceramics. It is a four-digit heading within Chapter 68, which sits in Section XIII of the tariff schedule — Articles of Stone, Plaster, Cement, Asbestos, Mica; Ceramic Products; Glass and Glassware. Importers use this heading as the starting point for classifying goods of this type before narrowing down to the exact 8- or 10-digit code that determines the duty rate.
Correct classification under 68.04 matters because it drives your base (MFN) duty rate and determines whether trade-remedy tariffs — Section 301, Section 232, IEEPA, or anti-dumping/countervailing duties — apply to your shipment. Misclassification is one of the most common and costly import errors.
This heading covers grinding wheels, millstones, grindstones, and sharpening stones made from natural stone, bonded abrasives, or ceramics, used for grinding, sharpening, polishing, and cutting operations. Importers include industrial manufacturers, tool suppliers, metalworking shops, and retailers of sharpening equipment and consumable abrasive products.
Examples of products US importers typically classify under heading 68.04 include:
Product examples are illustrative; confirm the exact 10-digit classification for your specific item.
A full US HTS code is 10 digits, built up in stages. For heading 68.04:
There is no single duty rate for a 4-digit heading — the rate is set at the subheading level and depends on your product's exact code and its country of origin. To determine what you'll actually owe on goods under 68.04:
The classification tool below verifies the code against the USITC Harmonized Tariff Schedule and flags Section 301 exposure automatically.
Enter your product description below to get the specific 10-digit HTS code, duty rate, and Section 301 tariff status.
Related guide: HTS Code Classification Guide
HTS heading 68.04 covers millstones, grindstones, grinding wheels and the like, without frameworks, for grinding, sharpening, polishing, trueing or cutting, hand sharpening or polishing stones, and parts thereof, of natural stone, of agglomerated natural or artificial abrasives, or of ceramics. It is a 4-digit heading in Chapter 68, Section XIII (Articles of Stone, Plaster, Cement, Asbestos, Mica; Ceramic Products; Glass and Glassware). The full duty rate is set at the 8- to 10-digit subheading level.
Products described as millstones, grindstones, grinding wheels and the like, without frameworks, for grinding, sharpening, polishing, trueing or cutting, hand sharpening or polishing stones, and parts thereof, of natural stone, of agglomerated natural or artificial abrasives, or of ceramics are classified under heading 68.04. To find the exact 10-digit code for a specific product, run a classification against the USITC Harmonized Tariff Schedule.
The rate depends on the specific 10-digit subheading and country of origin. Determine the full HTS code, then check the general (MFN) rate plus any Section 301, Section 232, IEEPA, or anti-dumping/countervailing duties for your origin.
Section 301 tariffs apply to many products of Chinese origin, assigned at the 8-digit subheading level. Whether a product under 68.04 carries one depends on its exact subheading and origin — verify against the current USTR Section 301 lists.