HTS Code Lookup

73.24

Sanitary ware and parts thereof, of iron or steel

HTS Heading

73.24

Chapter

Chapter 73

Schedule

HTSUS

Duty rates and tariff status vary by subheading (6–10 digit code). Run a full classification below to get the exact rate for your product.

About HTS Heading 73.24

HTS heading 73.24 of the United States Harmonized Tariff Schedule covers sanitary ware and parts thereof, of iron or steel. It is a four-digit heading within Chapter 73, which sits in Section XV of the tariff schedule — Base Metals and Articles of Base Metal. Importers use this heading as the starting point for classifying goods of this type before narrowing down to the exact 8- or 10-digit code that determines the duty rate.

Correct classification under 73.24 matters because it drives your base (MFN) duty rate and determines whether trade-remedy tariffs — Section 301, Section 232, IEEPA, or anti-dumping/countervailing duties — apply to your shipment. Misclassification is one of the most common and costly import errors.

This heading covers sanitary fixtures and fittings made from iron or steel, including bathtubs, sinks, toilets, and related plumbing components used in bathrooms and kitchens. US importers of plumbing supplies, bathroom fixtures manufacturers, and construction material distributors commonly import products under this classification.

Common Products Classified Under 73.24

Examples of products US importers typically classify under heading 73.24 include:

Steel bathtubs and shower traysIron or steel wash basins and sinksSteel toilet seats and coversMetal bidet fixturesSteel urinals for commercial useMetal shower enclosure frames and partsSteel pedestal bases for sinksMetal overflow pipes and drainage fittings for sanitary ware

Product examples are illustrative; confirm the exact 10-digit classification for your specific item.

How to Read HTS Code 73.24

A full US HTS code is 10 digits, built up in stages. For heading 73.24:

  • 73 — the Chapter (the broad product category).
  • 73.24 — the 4-digit heading (this page): sanitary ware and parts thereof, of iron or steel.
  • 6 digits — the international subheading (matches HS codes worldwide).
  • 8–10 digits — the US-specific statistical suffix that sets your exact duty rate and Section 301 status.

Duty Rate & Section 301 Status for 73.24

There is no single duty rate for a 4-digit heading — the rate is set at the subheading level and depends on your product's exact code and its country of origin. To determine what you'll actually owe on goods under 73.24:

  • Find the exact 10-digit subheading for your specific product.
  • Read the general (MFN) duty rate from Column 1 of the HTS.
  • Add any trade-remedy tariffs that apply to your origin — Section 301 (China), Section 232 (steel/aluminum), IEEPA, or AD/CVD orders.

The classification tool below verifies the code against the USITC Harmonized Tariff Schedule and flags Section 301 exposure automatically.

Run full classification analysis

Enter your product description below to get the specific 10-digit HTS code, duty rate, and Section 301 tariff status.

Include country of origin for more accurate Section 301 analysis (e.g., "cotton t-shirts from Bangladesh")

Other Headings in Chapter 73

73.01Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel73.02Railway or tramway track construction material of iron or steel: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates, rail clips, bedplates, ties and other material specialized for jointing or fixing rails73.03Tubes, pipes and hollow profiles, of cast iron73.04Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel73.05Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel73.06Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel73.07Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel73.08Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel73.09Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment73.10Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment73.11Containers for compressed or liquefied gas, of iron or steel73.12Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated73.13Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel73.14Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel73.15Chain and parts thereof, of iron or steel73.16Anchors, grapnels and parts thereof, of iron or steel73.17Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper73.18Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel73.19Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included73.20Springs and leaves for springs, of iron or steel73.21Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel73.22Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot-air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel73.23Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel73.25Other cast articles of iron or steel73.26Other articles of iron or steel

Frequently Asked Questions

What is HTS code 73.24?

HTS heading 73.24 covers sanitary ware and parts thereof, of iron or steel. It is a 4-digit heading in Chapter 73, Section XV (Base Metals and Articles of Base Metal). The full duty rate is set at the 8- to 10-digit subheading level.

What products are classified under HTS 73.24?

Products described as sanitary ware and parts thereof, of iron or steel are classified under heading 73.24. To find the exact 10-digit code for a specific product, run a classification against the USITC Harmonized Tariff Schedule.

How do I find the import duty rate for HTS 73.24?

The rate depends on the specific 10-digit subheading and country of origin. Determine the full HTS code, then check the general (MFN) rate plus any Section 301, Section 232, IEEPA, or anti-dumping/countervailing duties for your origin.

Is HTS 73.24 subject to Section 301 tariffs?

Section 301 tariffs apply to many products of Chinese origin, assigned at the 8-digit subheading level. Whether a product under 73.24 carries one depends on its exact subheading and origin — verify against the current USTR Section 301 lists.