HTS Code Lookup

72.01

Pig iron and spiegeleisen in pigs, blocks or other primary forms

HTS Heading

72.01

Chapter

Chapter 72

Schedule

HTSUS

Duty rates and tariff status vary by subheading (6–10 digit code). Run a full classification below to get the exact rate for your product.

About HTS Heading 72.01

HTS heading 72.01 of the United States Harmonized Tariff Schedule covers pig iron and spiegeleisen in pigs, blocks or other primary forms. It is a four-digit heading within Chapter 72, which sits in Section XV of the tariff schedule — Base Metals and Articles of Base Metal. Importers use this heading as the starting point for classifying goods of this type before narrowing down to the exact 8- or 10-digit code that determines the duty rate.

Correct classification under 72.01 matters because it drives your base (MFN) duty rate and determines whether trade-remedy tariffs — Section 301, Section 232, IEEPA, or anti-dumping/countervailing duties — apply to your shipment. Misclassification is one of the most common and costly import errors.

This heading covers pig iron and spiegeleisen (iron-manganese alloy) in their raw primary forms such as pigs, ingots, or blocks, which are foundational materials used in steel and iron production. US importers include steel mills, foundries, and metal manufacturers who use these materials as inputs for producing finished steel products.

Common Products Classified Under 72.01

Examples of products US importers typically classify under heading 72.01 include:

Pig iron ingots from blast furnacesSpiegeleisen pigs for steel productionCast iron blocks in primary formFoundry pig iron for casting operationsHigh-carbon pig iron ingotsFerro-manganese pig iron blocksCupola furnace pig ironBasic pig iron in ingot molds

Product examples are illustrative; confirm the exact 10-digit classification for your specific item.

How to Read HTS Code 72.01

A full US HTS code is 10 digits, built up in stages. For heading 72.01:

  • 72 — the Chapter (the broad product category).
  • 72.01 — the 4-digit heading (this page): pig iron and spiegeleisen in pigs, blocks or other primary forms.
  • 6 digits — the international subheading (matches HS codes worldwide).
  • 8–10 digits — the US-specific statistical suffix that sets your exact duty rate and Section 301 status.

Duty Rate & Section 301 Status for 72.01

There is no single duty rate for a 4-digit heading — the rate is set at the subheading level and depends on your product's exact code and its country of origin. To determine what you'll actually owe on goods under 72.01:

  • Find the exact 10-digit subheading for your specific product.
  • Read the general (MFN) duty rate from Column 1 of the HTS.
  • Add any trade-remedy tariffs that apply to your origin — Section 301 (China), Section 232 (steel/aluminum), IEEPA, or AD/CVD orders.

The classification tool below verifies the code against the USITC Harmonized Tariff Schedule and flags Section 301 exposure automatically.

Run full classification analysis

Enter your product description below to get the specific 10-digit HTS code, duty rate, and Section 301 tariff status.

Include country of origin for more accurate Section 301 analysis (e.g., "cotton t-shirts from Bangladesh")

Other Headings in Chapter 72

72.02Ferroalloys72.03Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms72.04Ferrous waste and scrap; remelting scrap ingots of iron or steel72.05Granules and powders, of pig iron, spiegeleisen, iron or steel72.06Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)72.07Semi-finished products of iron or non-alloy steel72.08Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated72.09Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated72.10Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated72.11Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated72.12Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated72.13Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel72.14Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling72.15Other bars and rods of iron or non-alloy steel72.16Angles, shapes and sections of iron or non-alloy steel72.17Wire of iron or non-alloy steel72.18Stainless steel in ingots or other primary forms; semi-finished products of stainless steel72.19Flat-rolled products of stainless steel, of a width of 600 mm or more72.20Flat-rolled products of stainless steel, of a width of less than 600 mm72.21Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel72.22Other bars and rods of stainless steel; angles, shapes and sections of stainless steel72.23Wire of stainless steel72.24Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel72.25Flat-rolled products of other alloy steel, of a width of 600 mm or more72.26Flat-rolled products of other alloy steel, of a width of less than 600 mm72.27Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel72.28Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel72.29Wire of other alloy steel

Frequently Asked Questions

What is HTS code 72.01?

HTS heading 72.01 covers pig iron and spiegeleisen in pigs, blocks or other primary forms. It is a 4-digit heading in Chapter 72, Section XV (Base Metals and Articles of Base Metal). The full duty rate is set at the 8- to 10-digit subheading level.

What products are classified under HTS 72.01?

Products described as pig iron and spiegeleisen in pigs, blocks or other primary forms are classified under heading 72.01. To find the exact 10-digit code for a specific product, run a classification against the USITC Harmonized Tariff Schedule.

How do I find the import duty rate for HTS 72.01?

The rate depends on the specific 10-digit subheading and country of origin. Determine the full HTS code, then check the general (MFN) rate plus any Section 301, Section 232, IEEPA, or anti-dumping/countervailing duties for your origin.

Is HTS 72.01 subject to Section 301 tariffs?

Section 301 tariffs apply to many products of Chinese origin, assigned at the 8-digit subheading level. Whether a product under 72.01 carries one depends on its exact subheading and origin — verify against the current USTR Section 301 lists.