HTS Code Lookup

70.09

Glass mirrors, whether or not framed, including rear-view mirrors

HTS Heading

70.09

Chapter

Chapter 70

Schedule

HTSUS

Duty rates and tariff status vary by subheading (6–10 digit code). Run a full classification below to get the exact rate for your product.

About HTS Heading 70.09

HTS heading 70.09 of the United States Harmonized Tariff Schedule covers glass mirrors, whether or not framed, including rear-view mirrors. It is a four-digit heading within Chapter 70, which sits in Section XIII of the tariff schedule — Articles of Stone, Plaster, Cement, Asbestos, Mica; Ceramic Products; Glass and Glassware. Importers use this heading as the starting point for classifying goods of this type before narrowing down to the exact 8- or 10-digit code that determines the duty rate.

Correct classification under 70.09 matters because it drives your base (MFN) duty rate and determines whether trade-remedy tariffs — Section 301, Section 232, IEEPA, or anti-dumping/countervailing duties — apply to your shipment. Misclassification is one of the most common and costly import errors.

This heading covers glass mirrors of all types, including framed and unframed mirrors, as well as rear-view mirrors for vehicles. US importers include home furnishing retailers, automotive suppliers, furniture manufacturers, and construction distributors.

Common Products Classified Under 70.09

Examples of products US importers typically classify under heading 70.09 include:

Bathroom wall mirrors with wooden framesVehicle rear-view mirrors with glass reflective surfacesUnframed plate glass mirrors for wallsDecorative framed mirrors for living roomsAutomotive side-view mirrors with glass reflective elementsLarge format mirrors for dance studios and gymnasiumsBeveled edge mirrors for furniture and cabinetryMotorcycle rear-view mirrors

Product examples are illustrative; confirm the exact 10-digit classification for your specific item.

How to Read HTS Code 70.09

A full US HTS code is 10 digits, built up in stages. For heading 70.09:

  • 70 — the Chapter (the broad product category).
  • 70.09 — the 4-digit heading (this page): glass mirrors, whether or not framed, including rear-view mirrors.
  • 6 digits — the international subheading (matches HS codes worldwide).
  • 8–10 digits — the US-specific statistical suffix that sets your exact duty rate and Section 301 status.

Duty Rate & Section 301 Status for 70.09

There is no single duty rate for a 4-digit heading — the rate is set at the subheading level and depends on your product's exact code and its country of origin. To determine what you'll actually owe on goods under 70.09:

  • Find the exact 10-digit subheading for your specific product.
  • Read the general (MFN) duty rate from Column 1 of the HTS.
  • Add any trade-remedy tariffs that apply to your origin — Section 301 (China), Section 232 (steel/aluminum), IEEPA, or AD/CVD orders.

The classification tool below verifies the code against the USITC Harmonized Tariff Schedule and flags Section 301 exposure automatically.

Run full classification analysis

Enter your product description below to get the specific 10-digit HTS code, duty rate, and Section 301 tariff status.

Include country of origin for more accurate Section 301 analysis (e.g., "cotton t-shirts from Bangladesh")

Other Headings in Chapter 70

70.01Cullet and other waste and scrap of glass; glass in the mass70.02Glass in balls (other than microspheres of heading 7018), rods or tubes, unworked70.03Cast glass and rolled glass, in sheets or profiles, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked70.04Drawn glass and blown glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked70.05Float glass and surface ground or polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked70.06Glass of heading 7003, 7004 or 7005, bent, edge-worked, engraved, drilled, enameled or otherwise worked, but not framed or fitted with other materials70.07Safety glass, consisting of toughened (tempered) or laminated glass70.08Multiple-walled insulating units of glass70.10Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass70.11Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for electric lamps, cathode-ray tubes or the like70.13Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 7010 or 7018)70.14Signaling glassware and optical elements of glass (other than those of heading 7015), not optically worked70.15Clock or watch glasses and similar glasses, glasses for noncorrective or corrective spectacles, curved, bent, hollowed or the like, not optically worked; hollow glass spheres and their segments, for the manufacture of such glasses70.16Paving blocks, slabs, bricks, squares, tiles and other articles of pressed or molded glass, whether or not wired, of a kind used for building or construction purposes; glass cubes and other glass smallwares for mosaics or similar decorative purposes; leaded glass windows and the like; multicellular or foam glass in blocks, panels, plates, shells or similar forms70.17Laboratory, hygienic or pharmaceutical glassware, whether or not graduated or calibrated70.18Glass beads, imitation pearls, imitation precious or semiprecious stones and similar glass smallwares, and articles thereof other than imitation jewelry; glass eyes other than prosthetic articles; statuettes and other ornaments of lamp-worked glass, other than imitation jewelry; glass microspheres not exceeding 1 mm in diameter70.19Glass fibers (including glass wool) and articles thereof (for example, yarn, woven fabrics)70.20Other articles of glass

Frequently Asked Questions

What is HTS code 70.09?

HTS heading 70.09 covers glass mirrors, whether or not framed, including rear-view mirrors. It is a 4-digit heading in Chapter 70, Section XIII (Articles of Stone, Plaster, Cement, Asbestos, Mica; Ceramic Products; Glass and Glassware). The full duty rate is set at the 8- to 10-digit subheading level.

What products are classified under HTS 70.09?

Products described as glass mirrors, whether or not framed, including rear-view mirrors are classified under heading 70.09. To find the exact 10-digit code for a specific product, run a classification against the USITC Harmonized Tariff Schedule.

How do I find the import duty rate for HTS 70.09?

The rate depends on the specific 10-digit subheading and country of origin. Determine the full HTS code, then check the general (MFN) rate plus any Section 301, Section 232, IEEPA, or anti-dumping/countervailing duties for your origin.

Is HTS 70.09 subject to Section 301 tariffs?

Section 301 tariffs apply to many products of Chinese origin, assigned at the 8-digit subheading level. Whether a product under 70.09 carries one depends on its exact subheading and origin — verify against the current USTR Section 301 lists.