HTS Code Lookup

44.18

Builders' joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes

HTS Heading

44.18

Chapter

Chapter 44

Schedule

HTSUS

Duty rates and tariff status vary by subheading (6–10 digit code). Run a full classification below to get the exact rate for your product.

About HTS Heading 44.18

HTS heading 44.18 of the United States Harmonized Tariff Schedule covers builders' joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes. It is a four-digit heading within Chapter 44, which sits in Section IX of the tariff schedule — Wood and Articles of Wood; Wood Charcoal; Cork; Basketware and Wickerwork. Importers use this heading as the starting point for classifying goods of this type before narrowing down to the exact 8- or 10-digit code that determines the duty rate.

Correct classification under 44.18 matters because it drives your base (MFN) duty rate and determines whether trade-remedy tariffs — Section 301, Section 232, IEEPA, or anti-dumping/countervailing duties — apply to your shipment. Misclassification is one of the most common and costly import errors.

This heading covers prefabricated wooden building components and finished wood products used in construction and building assembly, such as door frames, window frames, flooring panels, and roofing shingles. US importers including construction companies, home builders, flooring distributors, and hardware retailers source these items from manufacturers worldwide.

Common Products Classified Under 44.18

Examples of products US importers typically classify under heading 44.18 include:

Wooden door frames and jambs, unassembled or partially assembledWooden window frames and sashesLaminated or engineered wood flooring panelsWooden roof shingles and shakesWooden wall paneling and interior cladding boardsWooden stair treads and stringersPrefabricated wooden deck boards and railingsCellular or hollow-core wooden door blanks

Product examples are illustrative; confirm the exact 10-digit classification for your specific item.

How to Read HTS Code 44.18

A full US HTS code is 10 digits, built up in stages. For heading 44.18:

  • 44 — the Chapter (the broad product category).
  • 44.18 — the 4-digit heading (this page): builders' joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes.
  • 6 digits — the international subheading (matches HS codes worldwide).
  • 8–10 digits — the US-specific statistical suffix that sets your exact duty rate and Section 301 status.

Duty Rate & Section 301 Status for 44.18

There is no single duty rate for a 4-digit heading — the rate is set at the subheading level and depends on your product's exact code and its country of origin. To determine what you'll actually owe on goods under 44.18:

  • Find the exact 10-digit subheading for your specific product.
  • Read the general (MFN) duty rate from Column 1 of the HTS.
  • Add any trade-remedy tariffs that apply to your origin — Section 301 (China), Section 232 (steel/aluminum), IEEPA, or AD/CVD orders.

The classification tool below verifies the code against the USITC Harmonized Tariff Schedule and flags Section 301 exposure automatically.

Run full classification analysis

Enter your product description below to get the specific 10-digit HTS code, duty rate, and Section 301 tariff status.

Include country of origin for more accurate Section 301 analysis (e.g., "cotton t-shirts from Bangladesh")

Other Headings in Chapter 44

44.01Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms; wood in chips or particles; sawdust and wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms44.02Wood charcoal (including shell or nut charcoal), whether or not agglomerated44.03Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared44.04Hoopwood; split poles; piles, pickets and stakes of wood, pointed but not sawn lengthwise; wooden sticks, roughly trimmed but not turned, bent or otherwise worked, suitable for the manufacture of walking sticks, umbrellas, tool handles or the like44.05Wood wool; wood flour44.06Railway or tramway sleepers (cross-ties) of wood44.07Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm44.08Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm44.09Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed44.10Particle board, oriented strand board (OSB) and similar board of wood or other ligneous materials, whether or not agglomerated with resins or other organic binding substances44.11Fiberboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances44.12Plywood, veneered panels and similar laminated wood44.13Densified wood, in blocks, plates, strips or profile shapes44.14Wooden frames for paintings, photographs, mirrors or similar objects44.15Packing cases, boxes, crates, drums and similar packings, of wood; cable-drums of wood; pallets, box pallets and other load boards, of wood; pallet collars of wood44.16Casks, barrels, vats, tubs and other coopers' products and parts thereof, of wood, including staves44.17Tools, tool bodies, tool handles, broom or brush bodies and handles, of wood; boot or shoe lasts and trees, of wood44.19Tableware and kitchenware, of wood44.20Wood marquetry and inlaid wood; caskets and cases for jewelry or cutlery, and similar articles, of wood; statuettes and other ornaments, of wood; wooden articles of furniture not falling in chapter 9444.21Other articles of wood

Frequently Asked Questions

What is HTS code 44.18?

HTS heading 44.18 covers builders' joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes. It is a 4-digit heading in Chapter 44, Section IX (Wood and Articles of Wood; Wood Charcoal; Cork; Basketware and Wickerwork). The full duty rate is set at the 8- to 10-digit subheading level.

What products are classified under HTS 44.18?

Products described as builders' joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes are classified under heading 44.18. To find the exact 10-digit code for a specific product, run a classification against the USITC Harmonized Tariff Schedule.

How do I find the import duty rate for HTS 44.18?

The rate depends on the specific 10-digit subheading and country of origin. Determine the full HTS code, then check the general (MFN) rate plus any Section 301, Section 232, IEEPA, or anti-dumping/countervailing duties for your origin.

Is HTS 44.18 subject to Section 301 tariffs?

Section 301 tariffs apply to many products of Chinese origin, assigned at the 8-digit subheading level. Whether a product under 44.18 carries one depends on its exact subheading and origin — verify against the current USTR Section 301 lists.